A mini card is 44 x 63 mm. The sheet is A3, 297 x 420 mm, a built-in preset in FitPrint. The layout below is what FitPrint produces with its defaults: Fit most packing, Original size scaling, a 5 mm gap between items and a 5 mm side margin. Nothing is scaled: each item is placed at 44 x 63 mm, its true size.

Where each item lands

Positions are millimetres on the A3 sheet as FitPrint wrote them, with y measured from the bottom edge.

x (mm)	y from bottom (mm)	Width (mm)	Height (mm)
12.83	351	44	63
69.67	351	44	63
126.5	351	44	63
183.33	351	44	63
240.17	351	44	63
12.83	282	44	63
69.67	282	44	63
126.5	282	44	63
183.33	282	44	63
240.17	282	44	63
12.83	213	44	63
69.67	213	44	63
126.5	213	44	63
183.33	213	44	63
240.17	213	44	63
12.83	144	44	63
69.67	144	44	63
126.5	144	44	63
183.33	144	44	63
240.17	144	44	63
12.83	75	44	63
69.67	75	44	63
126.5	75	44	63
183.33	75	44	63
240.17	75	44	63
12.83	6	44	63
69.67	6	44	63
126.5	6	44	63
183.33	6	44	63
240.17	6	44	63

What other settings place

Settings	Items per sheet	Placed size
Fit most, 5 mm gap and 5 mm margin (default)	30	44 x 63 mm
Stack, 5 mm gap and 5 mm margin	6	44 x 63 mm
Fit most, no gap or margin	36	44 x 63 mm
Fit most, 10 mm gap and 10 mm margin	25	44 x 63 mm
Stack, no gap or margin	6	44 x 63 mm

Turned landscape, 36 fit: mini cards (44x63 mm) (landscape) on A3 (fit most, no gap or margin).

What the status line says

With 30 mini cards (44x63 mm) in the list, FitPrint's status line reads exactly "30 items · 1 A3 sheet". Add one more and it reads "31 items · 2 A3 sheets": the extra item starts a new sheet rather than shrinking anything.

How to lay this out in FitPrint

Drag your files in. Open FitPrint and drag your mini card files onto the window. Each file appears in the list with its size in the caption.
Choose the A3 sheet. Click A3 in the sheet preset grid. FitPrint then lays the items out on a 297 x 420 mm sheet.
Keep scaling on Original size. Original size places every item at 100 percent, so a printed item measures exactly what the file says it measures.
Leave packing on Fit most. Fit most packs as many items per sheet as fit. With the default 5 mm gap and 5 mm side margin that is 30 mini cards (44x63 mm) per A3 sheet.
Change the gap or side margin only if you need to. The defaults are a 5 mm gap and a 5 mm side margin. The settings table on this page shows what every other recorded setting places on this sheet.
Export and print at actual size. Click Export PDF, then set Scale to 100 percent and Pages per Sheet to 1 in the print dialog so nothing re-scales the exported file.

30 mini cards (44x63 mm) fit on one A3 sheet at actual size

Where each item lands

What other settings place

What the status line says

How to lay this out in FitPrint

Related layouts